Q&A.

Summary of fault diagnosis methods for CNC drilling machines

2022-05-12
What are the diagnostic methods of CNC drilling machine fault? I hope to help you find the cause of the fault as soon as possible to solve the problem!I. System self-diagnosis methodSelf-diagnosis ...
Q&A.

What are the pressure devices in the CNC drilling machine

2022-05-12
What are the pressure devices in the CNC drilling machine, let's go and see it:1, section CAM pressure. The CAM and CAM corresponding to the convex and convex are arranged on the shaft and shaft sl...
Q&A.

Seven methods of CNC machine tool fault diagnosis

2022-05-12
Seven methods of CNC machine tool fault diagnosis1. Isolation method The isolation method disconnects some control loops to narrow the fault area. Example: A machining zhong, in the JOG mode, the f...
Q&A.

How to operate CNC drilling machine is better

2022-05-12
The slide seat of the CNC drilling machine runs through the whole length of the bed, the unilateral open type, the structure is simple and convenient, which is convenient for the up and down device...
Q&A.

Automatic CNC machine tool equipment maintenance and maintenance

2022-05-12
Automatic machine tool equipment maintenance and maintenance content analysis is as follows:1, each shift lubrication: the spindle four times, each rotation of the oil cup for two weeks, the chain ...
Q&A.

How to improve the accuracy of CNC machine tools

2022-05-12
The same CNC drilling machine, due to the different standards used, the obtained position accuracy is not the same, so when selecting the precision index of the CNC machine tool, it is also necessa...
Q&A.

The operation principle of CNC machine tools and how to operate safely

2022-05-12
CNC drilling machine is a machine tool which is based on the rotation of workpiece and the movement of turning tool for the feed movement to process the rotating surface. It can also be used for th...
Q&A.

What are the conditions for the normal operation of automatic CNC machine tools

2022-05-12
To ensure the normal operation of the fully automatic CNC drilling machine, certain conditions need to be met, including installation location, ambient temperature and power requirements.First, ins...
Q&A.

The difference between automatic CNC machine tool and general machine tool

2022-05-12
Automatic CNC drilling machine can turn all ferrous metals, non-ferrous metals and various projects. The machine tool has four feeding modes, namely, bar feeding mode, piece feeding mode, manual fe...
Q&A.

What are the requirements for power supply when fully automatic CNC machine tool is running

2022-05-12
Power supply is crucial for CNC drilling machine, because the power supply is the energy to maintain the normal work of the automatic machine tool, in addition, if the power failure will cause the ...
Q&A.

The preparation work and precautions before the use of automatic CNC machine tools

2022-05-12
1, before work, wear protective equipment according to the regulations, tie the cuffs, do not wear scarves, gloves. The braids of the female workers should be tied up in the hat. Wear protective gl...
Q&A.

What are the common automation equipment?

2022-04-23
Automation machine tool equipment is actually a large range, automation technology is widely used, often used in logistics, electronics, industry, automotive and many other industries, then what ar...
Q&A.

Total pneumatic system failure? Machine tools should be maintained in this way

2022-04-23
The pneumatic system of the machine tool is necessary to be maintained and maintained on time, and the purpose of doing so is to ensure that the air supply system is always cleaned and monotonous; ...
Q&A.

Machining center common problem repair

2022-04-23
Common problem maintenance of vertical machining centerFirst, the tool library problem disk can not be rotated;The reason:1, the tool change process suddenly stopped, can not continue to change the...
Q&A.

Troubleshooting of machine tool machining center

2022-04-23
1, initialization reset method: Under normal circumstances, the system alarm caused by transient faults can be cleared by hardware resetting or switching the system power supply in turn. If the sys...
Q&A.