How to operate CNC drilling machine is better

The slide seat of the CNC drilling machine runs through the whole length of the bed, the unilateral open type, the structure is simple and convenient, which is convenient for the up and down device of the workpiece and the sanitary finishing after work, easy maintenance, and the floor area is small, suitable for the processing and production of long work parts. As a casting structure, it can be extended by multiple sections, and users can choose or customize it by themselves.

Carefully check whether the program preparation, parameter setting, action sequencing, tool drying, workpiece clamping, switch maintenance and other links are correct, to avoid the formation of trouble during cycle processing, damage to the tool and related parts. Strictly according to the operation process to try to cut the knife, after debugging to do a good job of program maintenance.

The tool loading operation of the spindle or tool tower must be carried out in the state of mechanical suspension, and pay attention to the cooperation between and collaborator to avoid trouble. When changing the knife manually or actively, pay attention to the device orientation of the knife tower, the knife library, the robot arm rolling and the tool, etc., and keep the body and head away from the reverse part of the tool to avoid injury. For processing zhong center machine tools, we should also pay attention to check the corresponding relationship between the tool sleeve number and the tool number, so as to avoid the disorder of the tool library tool number forming a tool change and or processing knife collision incident.

When the workpiece is installed, it should be firmly clamped to avoid the workpiece flying out of the formation of trouble. After the completion of the clamping, pay attention to the chuck wrench and other adjusting things to take out and avoid the formation of trouble after the spindle rotation. After the machine tool is powered on, the mechanical return to zero operation is carried out, and then the test run is 5 minutes, and the normal operation can start after acknowledging the correctness of the machinery, tools, fixtures, workpieces, numerical control parameters, etc.

Before the operation, carefully check whether the power grid voltage, oil pump, smooth, oil volume is normal, check whether the pressure, cooling, tubing, tools, fixtures and fixtures are missing, and do the regular maintenance of the machine tool.